Getting Started; Device Set Up - Tanda Clear Mode D'emploi

• Power supply
• Goggles
COMPONENTS:
• Plastic plug (to hold charge) (4)
• Orange power button (5)
• Indicator light (6)

GETTING STARTED

DEVICE SET UP

Getting started with the Tända light therapy device
is easy.
1. Unpack the Tända light therapy device and all
the accessories.
2. Before use, remove the plastic plug (4) from the
bottom of the Tända cordless handpiece, other
wise it will not activate when the orange power
button (5) is pressed.
3. Peel the protective lens cover off the treatment
head and discard.
4. Firmly place device in the recharging stand and
use the power supply to plug the recharging
stand into a power outlet. Ensure orange indicator
light (6) is on. Once the charging is complete
(requires about 4 hours), the orange light will
turn off. See Charging the Battery for details.
5. The Tända light therapy device is now ready
to begin treatment.
2