Charging The Battery - Tanda Clear Mode D'emploi

CHARGING THE BATTERY

• Firmly place the device in the recharging stand (3)
• Plug the power supply into the base of the
recharging stand and the other end into an AC
power outlet (such as a wall socket).
• The power supply may also be plugged directly
into the receptacle at the bottom of the
handpiece (2) and then into an AC power outlet.
• The device will take about 4 hours to charge.
• The indicator light (6) will be orange while device
is charging; it will turn off when charging is complete.
• The Tända device is now ready to be used unplugged.
• Keep the Tända device fully charged at all times.
It is recommended to store the device in the
recharging stand after every use. You cannot
overcharge your Tända light therapy device.
• A fully charged device will be able to deliver
10, three-minute cycles between charges.
Note:
• You can also use your device plugged into an
AC power outlet (such as a wall socket). Simply
plug one end of the power supply into the
receptacle at the bottom of the handpiece and
connect the other end to the AC outlet in the wall.
The device will draw power from the AC outlet.
3