Electrical Connection; Installation And Connections - Hama 00095254 Mode D'emploi

Electrical connection

The electrical connections must be made according to the following
instructions in order to ensure safe and error-free operation:
■ Before you connect the device, compare the connection data for
the power supply adapter (voltage and frequency) on the type pla-
te with that of your mains power supply. This data must match to
avoid damage to the device.
■ Keep the cable away from hot surfaces and sharp edges.
■ Make sure not to bend the cable or pull it too tightly.

Installation and connections

For continuous playback, the device can be placed on a flat surface.
Insert the stand into the device.
Position the device upright or on its side. To do this, rotate the
base into the correct position (see arrow direction on the rear
side of the digital photo frame). The base locks into place auto-
matically.
CAUTION
The device can be damaged if it tips over or falls down.
► Make sure that the device cannot tip over.
Connect the connection cable to the socket on the device and
plug in the power supply adapter.
NOTE
► Only use the enclosed power supply adapter.
GB
31