EINHELL TC-VC 1930 SA Mode D'emploi D'origine page 15

2.2 Items supplied
Please check that the article is complete as spe-
cifi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Handle
•
Suction hose
•
3-piece suction tube
•
Dual purpose nozzle
•
Castor (2x)
•
Pleated filter with cover
•
Foamed plastic filter
•
Wheel (2x)
•
Adapter
•
Fastening screw for handle (2x)
•
Washer (2x)
•
Crevice nozzle
•
Original operating instructions
The equipment comes with a chain (z) on the tank
bottom. The chain helps to prevent static charging
during use.
Anl_TC_VC_1930_SA_SPK7.indb 15 Anl_TC_VC_1930_SA_SPK7.indb 15
GB
3. Proper use
The wet and dry vacuum cleaner is designed
for wet and dry vacuuming using the appropri-
ate fi lter. The equipment is not suitable for the
vacuuming of combustible, explosive or harmful
substances.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage..................................230V ~ 50 Hz
Power consumption: ................................ 1500 W
Max. power consumption
Automatic socket-outlet: ......................... 2000 W
Max. total power consumption: ............... 3500 W
Tank volume: ..................................................30 l
Weight: .......................................................6.3 kg
5. Before starting the equipment
Warning!
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
The equipment may be connected only to a
shock-proof socket-outlet.
5.1 Assembling the equipment
Fitting the equipment head (Fig. 6)
The equipment head (3) is fastened to the tank
(8) by the locking hook (7). To remove the equip-
ment head (3), open the locking hook (7) and
take off the equipment head (3). When fi tting the
equipment head (3), make sure that the locking
hook (7) locks into place correctly.
Fitting the wheels (Fig. 5)
Fit the wheels in accordance with Fig. 5.
- 15 -
30.09.15 07:18 30.09.15 07:18