Warranty; Environmental Protection; Specifications; Manufacturer And Aftersales Service Address - HEBU medical TITANIUM II HB 8884-A Mode D'emploi Et De Service

EN

10 Warranty

We provide a guarantee for HEBU cast cutting saws in accordance with statutory and country-
specific legislation (proof of purchase by invoice or delivery note). The minimum warranty period
is 18 months. In the event of material or production defects, we provide free repair of the device.
Any attempt to carry out unauthorized repairs will result in forfeiture of your warranty cover.
Damage caused by incorrect handling, overloading or normal wear and tear is not covered by
the warranty. Please contact our aftersales service department.
In case of warranty claims and repairs, please enclose a copy of the invoice or delivery note
with the device.

11 Environmental protection

Any packaging materials, disused devices and accessories must be sent for
environmentally friendly recycling or disposal. Electrical devices may not be
disposed of with the household waste but taken to the local disposal and
recycling facility for electrical devices.
For more information on this subject, consult your specialist dealer.

12 Specifications

Model
Mains connection
Rated current consumption
Current type
Oscillations
Weight
Protection class
IP Code
Noise level (A-graded)
Hand-arm vibration

13 Manufacturer and aftersales service address

HEBU medical GmbH
Badstraße 8
78532 Tuttlingen
Germany
Tel: +49 74 61 / 94 71 - 0
Fax: +49 74 61 / 94 71 - 22
eMail: service@HEBUmedical.de
Web: www.HEBUmedical.de
26
HB 8884 (A / G / S)
220-240 Volt, 50/60 Hz.
250 Watt
1 ~
ca. 12000 - 21000 min
1,2 kg
II
IP2X
Typically 75 dB (A).
The noise level during sawing can exceed 85 dB (A).
From 85 dB (A), wear ear protectors!
Typically lower than 2.5 m/s
Measured values determined in accordance with EN 50 144.
Oscillo-Saw TITANIUM II
HB 8884 (B / V)
100-120 Volt, 50/60 Hz.
250 Watt
1 ~
-1
ca. 12000 - 21000 min
1,2 kg
II
2
.
-1