Olympus OEV143 Mode D'emploi page 21

General
Classification of equipment
– Evaluated to EN60601-1, EN60601-1-2, UL2601-1 (First
Edition), CSA601.1
– Type of protection against electric shock
Class I equipment
– Degree of protection against harmful ingress of water
Ordinary equipment
– Degree of safety of application in the presence of a
flammable anaesthetic mixture
Not protected equipment
– Mode of operation Continuous operation
– Information concerning type and frequency of technical
maintenance Not need maintenance equipment
– Main power switch Functional switch
CRT P-22 phosphor
Operating conditions
0 to +40°C (32 to 104°F) Temperature
700 to 1,060 hPa Pressure
30 to 85% (no condensation) Humidity
Transport and Storage conditions
–20 to +60°C (–4 to 140°F) Temperature
700 to 1,060 hPa Pressure
0 to 90% Humidity
Accessories supplied
AC power cord (1)
AC plug holder (1)
Side Cover (2)
Control panel cover (1)
Panel hinge (2)
Instructions for Use (1)
For OEV143:
Power requirements 1.2 ~ 0.5A
100 to 240 V AC, 50/60Hz
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
× 13
5
(13 ⁄
8
not incl. projecting parts and controls
Mass Approx. 17kg (37 lb 8 oz)
..........................................................................................................................................................................................................
1) Use a proper power cord for your local power supply. (See page 3.)
1)
× 17 inches)
1
⁄
2
For OEV203:
Power requirements 1.5 ~ 0.6A
100 to 240 V AC, 50/60Hz
Dimensions (w/h/d) Approx. 450 × 458 × 503 mm
3
(17 ⁄
4
not incl. projecting parts and controls
Mass Approx. 30 kg (66 lb 2 oz)
Design and specifications are subject to change without
notice.
Year of
manufacture A812345
Medical Device
Directive
c
1)
×18 × 19
1 7
⁄ ⁄ inches)
8 8
The last digit of the year of
manufacture is given in the
second digit of the serial
number.
This device complies with the
requirements of Directive 93/
42/EEC concerning medical
devices.
Classification: Class I
This device complies with the
EMC requirements of EN
60601-1-2.
Emission: Class B of EN
55011.
21