Peach PS600-20 Mode D'emploi page 9

Description of parts
Main switch
1
Cutter opening for paper (max. 7 pages)
2
manual
Cutter opening for CD
3
FWD - Forward
4
REV - Reverse
5
Power signal
6
Overheat signal
7
Bin-Full signal
8
Door open signal lamp
9
Power cord
10
Waste basket
11
Paper tray cover
12
Paper guide
13
Automatic cutting opening for paper
14
(max. 70 pages)
Service door paper jam
15
Installation / Commissioning
Make sure that the main switch
to position "0".
Connect the mains cable
230 volt socket.
In the first applications it can happen that
residual lubricant may evaporate. If you
should notice a slight smell of fire or
small clouds of smoke in a new device,
you can continue to work normally. If this
still happens even after a long period of
use, please contact technical support.
Normal operation
Set the main switch
the LED "POWER"
When inserting paper, the machine
starts automatically and stops as soon
as all paper has passed through.
The cutting capacity is 7 sheets
(80 g / m ) or 1 CD or credit card.
2
However, you should only destroy paper
or CD / credit cards, otherwise the device
may be overloaded.
Never attempt to shred sealed envelopes.
is set
1
to a normal
10
to position "1",
1
lights up.
6
This can cause damage to the cutterbar.
Empty envelopes and unfold the contents
completely before you shred them. Rub-
berized envelopes, labels or other prod-
ucts with adhesive must NEVER be
crushed as this may cause paper jams.
Do not shred wet paper, carbon paper or
plastic bags. The debris jams the cutter-
bar, which can lead to jams and reduced
performance of the unit.
Use auto paper feeder
You can cut a maximum of 70 A4
(80 g / m ) sheets using the automatic
2
paper feeder. To do this, fold the paper
tray cover and the paper guide
12
and fill the paper into the paper tray
When inserting stapled sheets, make sure
they are inserted correctly according to the
following instructions:
When inserting paper, the machine starts
automatically and stops as soon as all
paper has passed through.
CD / Credit card destruction
Destroy CDs by inserting them into the
separate slot. Insert a CD or credit card
into the "Cutting opening for CD"
The machine starts automatically and
stops as soon as all paper has passed
through.
up
13
.
14
.
3
9