The appliance has been manufactured using high quality materials that can be
reused or recycled. Dispose of the appliance in a suitable waste collection centre.
Directions for correct disposal of the product according to European Directive
2002/96/EC and Italian Legislative Decree no. 151 dated 25 July 2005. At the end of
its useful life, the product should not be disposed of with unsorted household waste.
It should be taken to a suitable selective waste collection centre set up by the local
authorities or returned to a retailer who provides this service.
Separate collection of an electrical household appliance avoids a possible negative
impact on the environment and health arising from improper disposal and enables
the materials it is made of to be recovered so as to achieve signifi cant savings of
energy and resources. The crossed-out wheelie bin symbol applied on the product
highlights the need to dispose of electric appliances separately. Improper disposal
of the product by the user shall be subject to specifi c administrative sanctions as
provided for under current regulations.
The packaging is made from recyclable materials. Contact the competent authorities
for information regarding local legislation.
First use or after a long period of disuse
•
Fill the tank with fresh, still water (Fig. 4).
•
Plug in the appliance and turn it on (Fig. 13).
•
Make sure the lever is closed (Fig. 3).
•
As well as buttons A-B-C, warning light D also blinks RED.
•
Place a large container (at least 250 ml) under the dispensing spout (Fig. 9).
•
Press one of the buttons A-B-C. Wait for the machine to complete the priming cycle and
fi ll with water. Warning light D will switch off.
NOTE: if, at the end of the priming cycle, buttons A-B-C and warning light D continue
to blink, repeat the procedures as listed in the previous step.
•
Buttons A-B-C will blink simultaneously to indicate that the machine is warming up.
•
When buttons A-B-C turn on and remain steadily lit, perform a rinse by pressing button C.
Press the button again to perform a second rinse. Wait for the machine to complete the
rinse cycle.
•
At the end of this operation, empty out the water from the used capsule drawer (Fig. 6).
•
Fill the tank with fresh, still water (Fig. 4).
•
Switch on the appliance by pressing the power on/off switch (Fig. 14).
•
Buttons A-B-C will blink simultaneously to indicate that the machine is warming up. When
the buttons turn on and remain steadily lit, the appliance is ready for use.
English
Instructions for use and disposal
Turning on the appliance
31