HOLL'S Combi Access Manuel D'installation page 7

21 Side panel 2
(2180 x 1905 x 48 mm)
22 Screw lid cover cap
23 Back panel
(1884 x 1860 x 67.5 mm)
24 Back guardrail
(430 x 250 x 38 mm)
25 Moveable SS armrest - back panel
26 Bench surface decorative bar
27 Bench surface panel 2
28 Bench support panel 2
Read the assembly instructions carefully before starting.
Choice of location
Holl's saunas are designed solely for interior installation.
Select a space:
• Inside, in a dry area, on a flat stable surface that can support the weight of your sauna.
• The height must be sufficient for you to reach the ceiling and carry out electrical connections and maintenance.
• Away from any source of water, flames or flammable materials.
Practical advice
• Note that sauna assembly requires 2 or 3 adults.
• Clearly identify each panel before you begin.
• During assembly, position your sauna's mains cable so that it is easily accessible.
• Note that there are variations between the models.
•
IMPORTANT:
•
Please check the countersink and hole diameter of the drill holes to avoird damaging the wood.
•
The minimum room height required for installation is 2020 mm.
Tools needed
Phillips
Screwdriver
Pencil
Installation
(1050 x 147 x 68 mm)
(200 x 80 x 600 mm)
(200 x 80 x 600 mm)
(1882 x 500 x 33 mm)
(484 x 70 x 33 mm)
Tape measure
Cutter
2 3
6 3
1 1
EN
3 3
2 3
1 3
1 1
3 3
Step ladder
7