Fitting and Detaching the Knife Block
1. Turn the mixing jar on its head.
2. With a little effort, turn the screw cap counterclockwise.
3. Carefully remove the screw cap with the knife block from
the mixing jar.
4. Remove the seal ring for cleaning.
5. After drying, put the sealing ring back in the screw cap.
6. Tighten the screw cap with the knife block clockwise
again.
7. Make sure that the screw cap is firmly in place.
CAUTION:
Only operate the appliance if you have properly fitted the
knife block with the seal ring! Otherwise the mixing jar will
not be sealed.
Problem
Possible Cause
The appliance is
The appliance is not connected to mains
not working.
power.
Wrong switch setting.
The appliance is fitted with a safety switch.
This prevents the motor from starting up
unintentionally.
The overheating protection has been acti-
vated. The motor is too hot.
Technical Data
Model:.................................................................PC-UM 1213
Power supply:.....................................220 - 240 V~, 50 - 60 Hz
Power consumption: .....................................................500 W
Protection class: ...................................................................
Filling quantity: ................................................... max. 1.0 litre
Net weight: ....................................................... approx. 1.2 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibility
and low voltage directives, and is manufactured according
to the latest safety regulations.
PC-UM1213_IM
Mixing Jar, Lid, Screw Cap with Knife Block, Sealing
Rings and Measuring Cup
Use a little dishwashing liquid and clean these components
in warm rinsing water. Then dry everything before assem-
bling the parts again.
Housing
Only a moderately moist cloth should be used for cleaning
the outside of the appliance.
• Clean the appliance as described. Let the accessories
dry completely.
• We recommend that you keep the appliance in the
original packaging, if you do not want to use it for a
longer period.
• Always store the appliance out of reach of children in a
well ventilated, dry place.
Troubleshooting
Solution
Check the mains connection.
Check the position of the rotary switch.
Check that the mixing jar is firmly in place.
1. Immediately turn the switch to the position O. Discon-
nect the mains plug from the wall socket.
2. Let the appliance cool down for at least 15 minutes
before switching it on again.
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
re-utilisation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
Storage
Disposal
18.05.20
37