Intended Use; Operation; Safety; Initial Use - Beurer HK 49 Cosy Mode D'emploi

3. Intended use

cAutION
This heating pad is only designed to warm up the human body.

4. Operation

4.1 safety

cAutION
The heating pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heating pad with an automatic switch-off in the event of a
fault. If the SAFETY SYSTEM has switched off the heating pad, the temperature settings are no longer
illuminated when switched on. Please note that for safety reasons, the heating pad can no longer be
operated after a fault has occurred and must be sent to the specified service address.

4.2 Initial use

cAutION
Ensure that the heating pad will not bunch up or become folded during use.
• First, connect the controller to the heating pad by inserting the plug-in coupling.
• Then plug the mains plug into the socket.
• Then place the heating pad on your stomach or back. Subsequently guide the long, elastic rubber band
around the body and secure the heating pad by closing the Velcro fastener.

4.3 switching on

To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings (4) are illuminated when switched on.

4.4 setting the temperature

Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOte
The fastest way to warm up the heating pad is to initially set the highest temperature setting.
NOte
These heating pads have a fast heating function, which allows the pad to warm up faster
in the first 10 minutes.
12