Perry Electric 1GA51917MET/P Instructions Pour L'installation Et Mode D'emploi page 16

3.i - RECORDING THE DATE OF REPLACEMENT
Note: in accordance with the reference standard, the appliance must be replaced after 5
years from installation and the replacement date indicated in the space provided on the
front of the box, as shown below (fig. 12).
!
Select the adhesive label corresponding to the month of installation (replacement) (e.g.
January = 01, October = 10), remove from the backing sheet and fix it to the appliance.
!
Select the label corresponding to the year of replacement (e.g.: Year of installation 2015 +
5 years: fix the label 2020), remove from the backing sheet and fix.
EN
!
Record the date of installation, manufacture, replacement, installation area, contractor
stamp and signature in the spaces provided alongside.
Years labels replacement
Months labels
Year of
replacement
installation
2015
01 07
2016
02 08
2017
03 09
2018
04 10
2019
05 11
2020
06 12
E.g.: with July 2015 as installation
4.i - CHECKING DETECTOR OPERATION
• Ensure that the detector has been connected to the mains for at least 1 minute.
• Spray test gas (not supplied) into the vents on the front panel of the appliance until the red LED
switches on and the buzzer sounds intermittently.
• Stop spraying the gas into the detector vents and wait for a few seconds. The appliance
returns to "normal operating" status and all alarm signals are reset (fig. 3).
16
Replacement Year of
Years installation
2021
2020 2026
2022
2021 2027
2023
2022 2028
- - - -
2023 - - - - sostituire entro
07 2020
mese | anno
- - - -
2024 - - - -
- - - -
2025 - - - -
07
date, attach the labels:
ENTER THE INDICATED DATA
Installation date
Manufacture date
*Replacement date
*after 5 years from date of installation
Installation area
Fig. 12
2020
Contractor stamp and signature