Perry Electric 1GA51917MET/P Instructions Pour L'installation Et Mode D'emploi page 15

2.i - ELECTRICAL CONNECTIONS
IMPORTANT: the installation and electrical connection of devices and appliances must be carried out by qualified personnel and in compliance with standards and
laws in force. The appliance is suitable only for applications in household or similar environments. For application in special environments, see specific
environment standards.
The examples given in this documentation are indicative
WARNING: the main appliance's must include a device ensuring omnipolar disconnection.
The detector must be powered continuously in order to guarantee maximum safety.
For the electrical connections, attach the detector terminals using cables of cross-section 1.5 mm maximum.
Connection procedure
switch mains supply off 230V~ 50-60 Hz
Connect 230V ~ power supply to the terminals:
n° = 1 Line
n° = 2 Neutral
2
230V~ 50÷60 Hz
Fig. 11
EN
15