Bestron DFA40CO Mode D'emploi page 24

OPERATION - General
The appliance is intended only for domestic use, not for professional use.
1. Fan housing
2. Fan blades
3. Speed switches
4. Motor
5. Stand, with rubber feet
6. Power cord and plug
OPERATION - Before use for the first time
Remove the fan from the packaging.
OPERATION - Ventilate
1. Put the fan on a horizontal and clean floor.
2. Point the front of the fan in the direction which
you wish to ventilate. You can also adjust the
fan to obtain a slightly downward, horizontal, or
slightly upward ow of air, tilt the fan housing to
the required angle.
3. Put the plug into the wall socket.
4. Switch on the fan by using the switches of one of
the three speeds:
a. Position 1, the fan operates at low speed.
b. Position 2, the fan operates at normal speed.
c. Position 3, the fan operates at high speed.
5. Stop the fan by turning the rotary switch to
position '0'.
WARNING:
It is inadvisable to expose people to a cold ow of air
for a long period of time (in particular, small children
and elderly people).
1
2
24
3
4
5
6
EN