Top Rack Loading - Kenmore ULTRA WASH 665.1241 Séries Guide D'utilisation Et D'entretien

Loading Recommendations
Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots. To avoid
damage to your delicate items, be sure china, crystal, stemware and other similar items do not touch during dishwasher operation.
Load lightweight and dishwasher-safe plastic items only in the top rack.
Deluxe Adjustable 2-position Rack (on some models)
You can raise or lower the top rack to fit tall items in either the
top or bottom rack. Adjusters are located on each side of the
top rack. Raise the top rack to accommodate glasses up to 9"
(22 cm) in the top rack and plates up to 11 ½" (29 cm) in the
bottom rack. Lower the top rack nearly 2" to accommodate
taller glasses.
1. To raise, lift rack until both sides are at the same height
and lock.
2. To lower, depress both tabs on rack adjusters, as shown,
and lower.
Removable Top Rack
The removable rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in
the lower level rack.
IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher.
To remove the rack (push tab rack stop):
1. Roll the rack ¹⁄₃ to ½ of the way out.
2. Remove each plastic push tab rack stop from the end of each track by pushing inward toward the
rack on the ridged area of the rack stop. The rack stop will snap open and can be easily removed
by pulling straight out. Be sure to support the track while removing rack stops.
3. Roll the rack all the way out of the track and remove from the dishwasher.
To replace the rack:
Reverse the above steps 1 to 3 to replace the rack into the dishwasher.
12
10 place load

Top Rack Loading

12 place load