en-us Troubleshooting
3
Troubleshooting
Dishwashers may occasionally
T r o u b l e s h o o t i n g
exhibit problems that are unrelated to
Problem
Cause
Dishwasher
Door may not be properly latched.
does not start
Dishwasher may not be turned on.
Dishwasher not reset or previous
cycle not completed.
Delay start engaged.
Interruption of electrical power
supply to dishwasher or blown fuse.
The door may have been closed
without first selecting a cycle.
Water supply may not be turned on. Check and turn on water supply.
Cycle does not
Door is opened longer than
resume after
4 seconds after a cycle has started.
door is opened
and closed
during cycle.
Display does
A fuse may have been blown or
not illuminate
circuit breaker tripped.
Door not closed or latched.
Note:
top of the door, the display only
illuminates when the door is opened
and controls are visible.
38
For models with controls on
a malfunction of the dishwasher itself.
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Action
Shut the door completely until you hear a
click.
Press the main power switch ( to turn
dishwasher on.
Reset the dishwasher.
Reset Delay start. ~ "Delay Start"
on page 31
Check circuit breaker.
Select a cycle and close the door.
Press Start button again to resume cycle.
Check the fuse or circuit breaker box and
replace the fuse or reset the breaker if
necessary.
Ensure door is properly latched and
completely closed.