Publicité
Les langues disponibles
Les langues disponibles
Mixing paddle (B):
The stirrer (9) always must be removed first for change of the mixing
paddle (10).
For change of the mixing paddle (10), use an Allen key SW6 to loosen the
two cheese-head screws
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel.
After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance. However, the following points always have to be
observed:
Keep the machine and the controls clean and functional.
To clean the mixing tools, tilt the mixing station to the rear and rest it on
the handles (3). Take care that no water enters into the motor during
cleaning.
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
Use only the original mixing bucket from Eibenstock as replacement for
a worn mixing bucket. Correct function is guaranteed only with this
mixing bucket.
In case of failure, a repair has to be carried out by an authorised
service workshop.
Our
after-sales
maintenance and repair of your product as well as spare parts.
EIBENSTOCK's application service team will gladly answer questions
concerning our products and their accessories.
M8x20.
service
responds
A
to
your
questions
20
B
B
concerning
Publicité
