Remote Control - Telefunken H32V1 Mode D'emploi

Getting Started

Remote Control

Teletext
Press TXT button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.
Digital Teletext (for UK only)
Press TXT button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the TXT button is pressed again, the TV returns
to television broadcast.
1. Source
2. Sleep Timer
3. No Function
4. Play
5. No function
6. Rapid reverse ( in media browser mode )
7. Mono/Stereo - Dual I-II / Current language (in
DVB channels)
8. Green button
9. Red button
10. Numeric buttons
11. Channel List/TV source
12. Menu
13. Volume up / down
14. Back button
15. Favourite channel list
16. Image size
17. My button 1 (*)
18. My button 2 (**)
19. Teletext
20. Electronic programme guide
21. Mute
22. Info
23. Exit (return)
24. Ok (conirm)
25. Programme up / down
26. Navigational buttons
27. Q.menu
28. Channel swap
29. Blue button
30. Yellow button
31. Subtitle on / off
32. Rapid advance
33. Stop
34. Pause (in media browser mode)
35. Multimedia browser
36. Picture mode selection
37. Standby button
38. Function LED
Using My button 1 (*)
Press MY BUTTON 1 for ive seconds when on a desired
source, channel or link, until the "MY BUTTON IS SET"
message is displayed on the screen. This conirms that the
selected MY BUTTON is now associated with the selected
function.
Using My Button 2 (**)
This button's main function is to switch between
DVB-T, DVB-C and DVB-S broadcasts. However, if
you press MY BUTTON 2 for ive seconds, you can
set a function to it as described in My Button 1. Note
that if you perform irst time installation, MY BUTTON
2 will return to its default function, switching between
DVB-T, DVB-C and DVB-S broadcasts.
English - 24 -