Hilti SF121-A Mode D'emploi page 13

ORIGINAL OPERATING INSTRUCTIONS
SF121-A battery drill driver
It is important that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating instruc-
tions are with the tool when it is
given to other persons.
Operating controls and component parts
Switch with electronic speed control
Reversing switch
Two-speed switch
Torque clutch setting ring
Motor brake
Battery release button (two)
Quick-release chuck
Contents
1. General information
2. Technical data
3. Safety rules
4. Before use
5. Operation
6. Care and maintenance
7. Accessories
8. Manufacturer's warranty - tools
9. Disposal
10. EC declaration of conformity
Printed: 07.07.2013 | Doc-Nr: PUB / 5070616 / 000 / 00
1. General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Caution: high voltage
Symbols
Read the operating
instructions before use.
The numbers refer to the illustrations. The illustra-
tions can be found on the fold-out cover pages. Keep
these pages open while you read the operating instruc-
tions.
In these operating instructions, the word "tool" always
refers to the SF121-A with battery.
Page
9
10
11
13
13
14
The following conditions must always be observed
14
when the tool is in use:
15
- The tool is for hand-held use only.
15
- Do not use the tool in places where the surrounding
15
conditions may present a risk of explosion.
Return waste material
for recycling.
9