Publicité
Les langues disponibles
Les langues disponibles
Input 1
1
2
3
4
5
SELECT
5 in / 1 out HDMI SWITCH
Input 4
1.
Use an HDMI cable to connect the HDMI sources (such as game
consoles, Blu-ray players and Digital TV Decoders) to the HDMI ports
marked "HDMI input".
2.
Use an HDMI cable to connect the TV to the HDMI port marked "HDMI
output".
3.
If required, connect the IR receiver to the "IR" input in order to continue
to operate it when it is positioned out of sight, for example, in a closed
cabinet. Remember to position the IR receiver itself within the remote
control's line of sight.
4.
The Connect 350 UHD™ is energy efficient and is powered by the
connected HDMI devices, thus requiring no power adapter.
5.
Pull the plastic strip from the remote control's battery compartment to
activate the battery and remove the protective film from the top.
7.
Use
Switching between connected HDMI devices
The Connect 350 UHD™ allows you to choose which HDMI source is
displayed on the TV. If you turn on one of the HDMI sources, it will
automatically switch to the correct input. If multiple HDMI sources are turned
on, the Connect 350 UHD™ will automatically switch to the HDMI source
that was activated last. If you want to select another HDMI source, please
use the remote control or the "Select" button on the front.
Note: Automatic switching must be supported by the HDMI source. If it is not
supported, you should manually select the appropriate HDMI source.
Connect 350 UHD™
Input 2
Input 3
Output
Input 5
IR input
DC input
5
Publicité
