Telephoning - switel 140x Mode D'emploi

Téléphone dect/gap sans fil à faible rayonnement
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Standby mode
All descriptions in this operating manual assume that the handset is in
Standby mode. The system switches to Standby mode by pressing the
B button.
Low−radiation operation (ECO mode)
Both in Call mode as well as in Standby mode, the radiation
is reduced considerably when ECO mode is activated as
compared to standard, cordless DECT telephones.
Navigating in the menu
All the functions can be accessed via the various menus. The entire menu
structure can be found in the appendix.
The softkeys and the arrow keys are used for navigation in the menu.
The menu is opened with the left softkey Menu.
Use the arrow keys F and H to move within the menu.
Press the softkey Select to open a sub menu.
Press Back to go back to the previous level.
By pressing the On−hook key B you will return to standby state.

5 Telephoning

Taking a call
{í}
If the handset is not in the base station:
A / L
If the handset is in the base station and Auto Answer is not activated:
A / L
If the handset is in the base station and Auto Answer is activated:
è
96
Your phone is ringing.
Press the Off Hook button or the Handsfree button.
Remove the handset from the base and press the Off
Hook button or the Handsfree button.
Remove the handset from the base − the call will be
taken automatically.

Publicité

Table des Matières
loading

Table des Matières