Yamaha HY256-TL-SMF Mode D'emploi page 3

Masquer les pouces Voir aussi pour HY256-TL-SMF:
Table des Matières

Publicité

PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of
serious injury or even death from electrical shock, short-circuiting,
damages, fire or other hazards. These precautions include, but are not
limited to, the following:
• Before installing the card in a device, check to make sure that the device is
compatible with the card. Also, do not install the card in any Yamaha products not
specified by Yamaha for use with the card in order to avoid possible electrical
shock, fire, or device damage.
• Do not attempt to disassemble or modify the card. Do not apply excessive force to
card connectors or other card components. Mishandling of the card may lead to
shock, fire hazard, or device failure.
• Be sure to disconnect the power cable of the host device before installing the card
and connecting/disconnecting the cables (in order to eliminate shock hazard,
undesired noise, and avoid device damage).
• Turn off all peripheral devices connected to the host device before installation, and
unplug all related cables.
• Do not place any burning items or open flames near the device, since they may
cause a fire.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of
physical injury to you or others, or damage to the device or other property.
These precautions include, but are not limited to, the following:
• Be sure to properly ground the host device to prevent electrical shock and/or
malfunction.
• Do not touch the metallic leads (pins) of the circuit board when handling the card.
The pins are sharp and may cause hand cuts.
• Wear a pair of heavy gloves during installation to avoid scratching or cutting your
hands on sharp edges.
PACARD_en_2 1/2
HY256-TL-SMF Owner's Manual
3

Publicité

Table des Matières
loading

Table des Matières