Switching Af/Mf; Using The Tripod Mount - Panasonic Lumix S-R70200 Manuel D'utilisation

∫ Notes on filter use
It is possible to attach the lens cap or the lens hood
0
with the filter already attached.
If you use two or more filters at the same time, part of a
0
recorded image may darken.
It is not possible to attach any items other than filters
0
such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.

Switching AF/MF

Switch AF/MF by sliding the
focus ring A forwards or
backwards (focus clutch
mechanism).
When the digital camera is
0
set to MF, the operation will
be MF irrespective of the
position of the focus ring.
Check the length indication B
0
when using MF. Use it as a guide
for focusing.
You can set the amount that
0
the focus moves with the focus
ring using menu settings in
compatible digital cameras.
Switch the lens to AF and set
the digital camera to MF. Refer to the operating
instructions for the digital camera for details.
24
DVQX1725

Using the Tripod Mount

When using a tripod, attach it
to the tripod mount of the
lens.
0
AF MF
∫ Changing the vertical/horizontal orientation
This way, you can quickly switch between the vertical
and horizontal orientation of the digital camera while the
tripod is in use.
1


3.1 4 5 7 13 28 ft
0.92 1.2 1.5 2.2 4 10 m
When a tripod is attached to
the tripod mount of the
digital camera, damage to
the lens may result when
carrying.
Rotate the tripod mount
locking knob in the
direction indicated by the
arrow to loosen.