Names And Functions Of Components - Panasonic LUMIX S-R24105 Manuel D'utilisation

Names and Functions of
Components
1 2
1
Lens surface
2
Focus ring
Rotates the focus ring to focus when set to MF (manual focus).
You can set the amount that the focus moves with
0
the focus ring using the menus in compatible digital
cameras. Refer to the operating instructions for the
digital camera for details.
7
8
9
3 4 5 6
3
Zoom ring
Zooms to telephoto or wide-angle.
4
Zoom lock switch
When the focal length is made 24 mm and the zoom
lock switch is set to [LOCK], the zoom ring will be
locked.
Apply the zoom ring lock when carrying the lens so
0
that it does not extend under its own weight.
5
AF/MF switch
Switches between AF (Auto Focus) and MF (Manual Focus).
When the digital camera is set to MF, the operation
0
will be MF irrespective of the setting on the AF/MF
switch.
6
O.I.S. switch
The stabilizer function is set to activate if the O.I.S.
switch is set to [ON].
We recommend setting the O.I.S. switch to [OFF]
0
when using a tripod.
7
Contact points
8
Lens fitting mark
9
Lens mount rubber
Note
There may be differences in focus when you use zoom
0
after focusing. Focus again.
If the sound of AF operation and stabilizer operation
0
bothers you during video recording, it is recommended
to record as follows:
– Set the AF/MF switch to [MF] to record.
– Set the O.I.S. switch to [OFF] and use a tripod to record.
21
DVQX1714