Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
18mm
Fig. 4
Fig. 5
05.20
OPERATING INSTRUCTIONS
B
15mm
1
6.1 ADJUST THE STAPLE LEG LENGHT
Be sure that the tool is not pointing at
yourself or anyone else when connec-
ting it to the compressed air line.
The stapler is adjustable for 15 or 18 mm staples.
The stapler setting for a different staple leg lenght is
altered as follows. Start by adjusting the depth of sta-
pling for deep clinching (=) as shown in Fig. 5.
–
With a 2,5 mm allen key, unscrew locking screw
(A) two turns.
–
With a screw driver, adjust screw (B) to 15 or 18
mm leg length (Fig. 4)
–
Tighten the locking screw.
6.2 ADJUST THE PENETRATION DEPTH
The depth of the stapling is easily adjused using the
setting knob.
– Depress the knob (Fig. 5/1) and turn it to any of the
five positions.
– Low stapling penetration
= Deep stapling penetration
Josef Kihlberg a.560PN
7
Publicité
Chapitres
Table des Matières
Dépannage
