Publicité
Anleitung BT-MG 135_SPK1:_
GB
8.9. Accessories (Fig. 15 / Fig. 1; Item 7)
1 Wire brush
2 Wire brush
3 Bristle brush
4 Wire brush
5 Whetstone
6 Collet chuck
7 HSS bits
8 Bristle brush
8.10. Description of the accessories:
Cutting disks:
For cutting metal and plastic.
Insert the cutting wheel onto the clamping spindle.
Grinding pins:
In various grinding head shapes.
For grinding and deburring metal and plastic.
HSS bits:
For drilling work on non-ferrous metals, wood, plastic
and printed circuit-boards.
Grinding wheels:
For cleaning and sharpening blades and tools. Insert
the grinding wheel onto the clamping spindle.
Grinding paper:
For grinding and deburring wood and plastic.
Polishing wheels / polishing pins / emery wheels:
For polishing brass, tin, copper, etc. Also for use with
polishing pastes.
Whetstone:
For sharpening tools.
Wire brushes:
For cleaning stone, metal, aluminium, etc.
Grinding belts:
For grinding word and plastic.
Diamond-tipped cutters:
For cutting and engraving ceramic, glass and other
hard materials.
Diamond cutting wheel:
For cutting, separating, grinding and deburring
materials, such as concrete, stone, china, ceramic,
etc.
Flap wheel:
For grinding metal, word and plastic. For straight
surfaces and contoured surfaces .
12
23.08.2007
11:03 Uhr
Seite 12
Sleeves:
Various sizes for mounting different accessory tools.
Cutters:
For cutting plastic, wood and soft metal
Bristle brushes
For cleaning and polishing metal surfaces (i.e.
cutlery, jewelry, etc.) Also for use with polishing
pastes.
Collet chuck key
For mounting accessory tools
9. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
9.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
9.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.
9.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
9.4 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Publicité
