shark ION RV860WVC Série Guide D'utilisation page 5

CHARGING THE SHARK ION™ HANDHELD
CHARGING DOCK
CHARGE INDICATOR LIGHTS
NOTE: During first use, discharge fully to properly condition the battery. It takes approximately 2.5 hours to
charge completely.
In Use Low Battery
Solid blue Blinking
IMPORTANT: The Shark ION Power Handheld has a pre-installed rechargeable battery. Battery must be
fully charged before using.
Prior to first use, the lithium-ion battery must be
charged completely, even if it comes with
a partial charge.
Place the Shark ION Handheld onto the charging
dock with the air-intake nozzle
in the cradle.
Plug the charging dock into a wall outlet.
Charging Charged
Fades in Dim
and out
s h a r kc l e a n . c o m
USING THE SHARK ION™ ROBOT
BUTTONS AND INDICATOR LIGHTS
s h a r kc l e a n . c o m
CLEAN BUTTON
Press to begin a long-running
cleaning session. Press again
to stop.
DOCK BUTTON
Press to stop cleaning and
send robot back to the
charging dock.
MAX MODE BUTTON
Press to begin a
powerful cleaning.
CHARGE INDICATOR LIGHTS
Display the amount of charge
remaining in the battery.
"!" ERROR INDICATOR
See Troubleshooting section
for full list of error codes.
WI-FI INDICATOR
Blue light: connected to
Wi-Fi.
Red light: not connected.
Flashing blue: setup mode.
No light: not set up yet.