References; Maintenance; More Information - Kenwood KMM-115 Mode D'emploi

TROUBLESHOOTING
Symptom Remedy
• Sound cannot be heard • Reconnect the Android device.
• If in [HAND MODE], launch any media player
during playback.
• Sound output only from
the Android device.
• If in [HAND MODE], relaunch the current media
• Restart the Android device.
• If this does not solve the problem, the connected
• Make sure KENWOOD MUSIC PLAY APP is installed
Cannot playback at
[BROWSE MODE].
• Reconnect the Android device and select the
• If this does not solve the problem, the connected
• Switch off the developer options on the Android
"NO DEVICE" or "READING"
keeps flashing.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Playback is intermittent or Turn off the power saving mode on the Android
sound skips. device.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
12
application on the Android device and start
playback.
player application or use another media player
application.
Android device is unable to route the audio signal
to unit. ( 13)
on the Android device. ( 7)
appropriate control mode.
Android device does not support [BROWSE
MODE]. ( 13)
device.
Android device does not support [BROWSE
MODE]. ( 13)

REFERENCES

Maintenance

Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector gently
with a cotton swab, being careful not to damage the
connector.

More information

Visit also the following website <www.kenwood.com/cs/ce/> for:
– Latest firmware updates and latest compatible item list
– Android™ application KENWOOD MUSIC PLAY
– Any other latest information
General
Detailed information and notes about the playable audio files are stated in an online manual on the
following website: www.kenwood.com/cs/ce/audiofile/
Playable files
• Playable audio file: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible
depending on the types or conditions of media or device.
About USB devices
• This unit can play MP3/WMA/WAV/FLAC files stored on a USB mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
Connector (on the reverse side of the faceplate)