Danby DAC060ECB2GDB Guide D'utilisation Et D'entretien page 15

OPERATING INSTRUCTIONS
USING THE REMOTE CONTROLLER BUTTONS
1
3
Model / Modèle :
R15B
1 2
3
3
4
Model / Modèle :
R15B
1
Model / Modèle :
R15B
AUTO OPERATION
2
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
3
2. Press the mode button and select AUTO.
3. Press the TEMP + / - button to set the desired temperature. The temperature can be
set within a range of 17°C (62°F) to 30°C (86°F) in 1°C (1°F) increments.
NOTE:
1. In the auto mode, the air conditioner can logically choose the mode of Cool, Fan, De-
humidifying by sensing the difference between the actual ambient room temperature
and the set temperature on the remote controller.
2. In Auto mode, you cannot change the fan speed. It has already been automatically
controlled.
3. If the Auto mode is not comfortable for you, the desired mode can be selected manu-
ally.
-----------------------------------------------------------------------------------------------------------------------
COOLING / FAN OPERATION
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select Cool mode.
3. Press the TEMP +/- button to set the desired temperature. The temperature can be
set within a range of 17°C (62°F) to 30°C (86°F) in 1°C (1°F) increments.
4. Press the FAN button to select the fan speed in four-steps, LOW, MED, HIGH or
AUTO.
NOTE:
In the FAN mode, the setting temperature is not displayed in the LED display and you are
not able to control the room temperature either. In this case, only step 1, 2 and 4 may be
performed.
-----------------------------------------------------------------------------------------------------------------------
DEHUMIDIFYING OPERATION
2
Ensure the unit is plugged in and power is available.
1. Press the ON/OFF button to start the air conditioner.
2. Press the MODE button to select Dehumidifying mode.
NOTE:
In the Dehumidifying mode, you cannot change the fan speed. It has already been auto-
matically controlled.
-----------------------------------------------------------------------------------------------------------------------
11