Zanussi ZHC92650XA Notice D'utilisation page 11

SAFETY INSTRUCTIONS
Caution! Closely follow the instructions set
out in this manual. All responsibility, for any
eventual inconveniences, damages or fires
caused by not complying with the instructions
in this manual, is declined. The extractor hood
has been designed exclusively for domestic
use.
Caution! Do not connect the appliance to the
mains until the installation is fully complete.
Before any cleaning or maintenance operation,
disconnect hood from the mains by removing
the plug or disconnecting the mains electrical
supply.
Always wear work gloves for all installation and
maintenance operations. The appliance is not
intended for use by children or persons with
impaired physical, sensorial or mental faculties,
or if lacking in experience or knowledge,
unless they are under supervision or have been
trained in the use of the appliance by a person
responsible for their safety. This appliance is
designed to be operated by adults, children
should be monitored to ensure that they do
not play with the appliance. This appliance is
designed to be operated by adults. Children
should not be allowed to tamper with the
controls or play with the appliance. Never
use the hood without effectively mounted
grating! The hood must NEVER be used as a
support surface unless specifically indicated.
The premises where the appliance is nstalled
must be sufficiently ventilated, when the
kitchen hood is used together with other
gas combustion devices or other fuels. The
ducting system for this appliance must not be
connected to any existing ventilation system
which is being used for any other purpose
such as discharging exhaust fumes from
appliances burning gas or other fuels. The
flaming of foods beneath the hood itself is
severely prohibited. The use of exposed flames
is detrimental to the filters and may cause a
fire risk, and must therefore be avoided in all
circumstances. Any frying must be done with
care in order to make sure that the oil does not
overheat and ignite.
Caution! Accessible parts of the hood
may became hot when used with cooking
appliance.
With regards to the technical and safety
measures to be adopted for fume discharging
it is important to closely follow the regulations
provided by the local authorities. The hood
must be regularly cleaned on both the inside
www.zanussi.com
and outside (AT LEAST ONCE A MONTH).
This must be completed in accordance with
the maintenance instructions provided in this
manual). Failure to follow the instructions
provided in this user guide regarding the
cleaning of the hood and filters will lead to
the risk of fires. Do not use or leave the hood
without the lamp correctly mounted due to
the possible risk of electric shocks. We will
not accept any responsibility for any faults,
damage or fires caused to the appliance as a
result of the non-observance of the instructions
included in this manual.
Warning! Failure to install the screws or fixing
device in accordance with these instructions
may result in electrical hazards.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable containers
to recycle it. Help protect the environment and
human health and to recycle waste of electrical and
electronic appliances. Do not dispose appliances
marked with the symbol
waste. Return the product to your local recycling
facility or contact your municipal offi ce department
for household waste or the shop where you
purchased this product.
USE
The hood is designed to be used either for
exhausting or fi lter version
INSTALLATION
The mains power supply must correspond to the
rating indicated on the plate situated inside the
hood. If provided with a plug connect the hood to a
socket in compliance with current regulations and
positioned in an accessible area, after installation.
If it not fi tted with a plug (direct mains connection)
or if the plug is not located in an accessible area,
after installation, apply a double pole switch
in accordance with standards which assures
the complete disconnection of the mains under
conditions relating to over-current category III in
accordance with installation instructions.
Warning! Before re-connecting the hood
circuit to the mains supply and checking the
efficient function, always check that the mains
cable is correctly assembled.
with the household
.
11