Cameo STUDIO PAR 64 CAN Manuel D'utilisation page 8

MODE SELECTION:
STATIC COLOUR MODE
Press the "MODE" button to select the Static Colour Mode. "C000", then
press the "ENTER" button to choose one of the static colours using the "UP"
and "DOWN" buttons. The "C1" represents Red, "C2" = Green, "C3" = Blue
and "CF" = strobe. Press ENTER (first 3. and then 4. digits blinks) again to
adjust brightness ( C1, C2, C3, 00-99 ) or strobe speed ( CF, 00-99) by using
UP and DOWN buttons. Examples: If you set C1, C2 and C3 to zero, the Tri Par
will have no LEDs on (blackout). If you set C1 to 99 and C2 and C3 to zero,
the Tri Par will be 100% Red.
RED
00 - 99 beam brightness adjustable.
GREEN
00 - 99 beam brightness adjustable.
BLUE
00 - 99 beam level adjustable.
STROBE
00 - 99 speed adjustable.
8