Cleaning The Condensation Channel And Drainage Hole; Removing The Fittings - Blaupunkt 5CK2 Série Manuel D'utilisation

en Cleaning and servicing
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
▶
in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 33
Clean the appliance, the fittings
2.
and the door seals with a dish
cloth, lukewarm water and a little
pH-neutral washing-up liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
Putting the food into the appliance.
6.
11.3 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Carefully clean the condensation
▶
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
4
11.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Lift the shelf, pull it out, lower it
▶
and swing it out to the side.
→ Fig.
5
Removing door racks
Lift the door rack and remove it.
▶
→ Fig.
6
34
Removing the fruit and vegetable
container
Pull out the fruit and vegetable
1.
container as far as it will go.
Lift the fruit and vegetable con-
2.
tainer at the front
⁠ .
→ Fig.
7
and remove it