Setting The Temperature; Automatic Defrost; Maintaining The Winemaster Air-Conditioner; Changing The Filter Without Removing The Cover - Wine Master C18 Notice D'installation Et D'utilisation

34

3.2.2 SETTING THE TEMPERATURE

Use the following process :
SET 1
Press the button
temperature of the cellar will appear. Use again the button
to lower the temperature. When the right temperature is set, press the button
- INDICATOR SET 2 flikering = cold mode on standby
- INDICATOR SET 2 lit fixed = engaged cold mode (compressor)
- INDICATOR SET1 flikering = heat
- INDICATOR SET1 lit fixed = heat (resistance)
On all the guides except C18.
GREEN INDICATOR LIGHTING OF The KEY LIGHT
THE CONTROLL BOARD = COOLING MODE ENGAGED (COMPRESSOR)
GREEN INDICATOR LIGHTING OF THE KEY LIGHT
THE CONTROLL BOARD = DE ICING MODE ENGAGED

3.3 AUTOMATIC DEFROST

The program of the thermostat will run an automatic defrost time several times a day.
During this position, the compressor cannot sart. Only the fan in the cellar can function.
The condensate water produced during this period will be evacuated through the tube

4. MAINTAINING THE WINEMASTER AIR-CONDITIONER

THE DUST FILTER
It is essential to replace the dust filter, which is outside the cellar, as soon as necessary and at least once a year. If it is
clogged, the air-conditioner may be seriously damaged.

4.1 CHANGING THE FILTER WITHOUT REMOVING THE COVER.

The setting of the targeted temperature of the cellar is made on the thermostat .
one seconde until the message o1 appears. Press then the button PRG, the set
SET 1
PRG
SET 2
SET 1
to increase the temperature or the button
PRG
OR RED INDICATOR LIGHTING ON
OR RED INDICATOR LIGHTING ON
to confirm it.
SET 2