Radio - Pioneer MVH-S420DAB Mode D'emploi

Presetting service components/stations
To store service components/stations
1
While receiving the service component/station you want to store, press and hold
one of the number buttons (1/
To retrieve stored service components/stations
1
Select the band, then press a number button (1/
Pause/Time shift functions
The unit stores recent broadcasts in the memory automatically. The memory capacity of
this unit varies depending on the bit rate of the service component used. The
approximate memory capacity is five minutes for 192 kbps.
To pause/resume
1
While receiving the service component, press and hold DISP.
To use the time shift function
1
While receiving the service component, press and hold DAB.
2
Press (skip back one minute)/
playback point.

Radio

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
to 6/
to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
) until it stops flashing.
to 6/
(skip forward one minute) to adjust the
- 8 -
).