Safety Instructions; Recommendations Related With Duct Cleaning, Stove And Smoke Duct Maintenance - deville C07751 Notice D'utilisation

Masquer les pouces Voir aussi pour C07751:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

4.4.3 Safety instructions

- Never throw water on the fire to put it out.
- The front glass as well as other parts of the stove are very hot : beware the risk of burns.
- The stove produces a large quantity of heat by means of radiation through the window : do not place
any materials or objects which are sensitive to heat within 1.5m of the windowed zone.
- It is imperative to maintain the loading closed at all times.
- Do not place any easily flammable materials near the appliance.
- Empty the ash pan into a special metal or otherwise inflammable receptacle used only for this
purpose. Ashes that might appear cold can still be very hot, even if you think they have had enough
time to get cold.
- It is especially important not to store wood under the appliance.
- If there is a fire in the chimney, shut the air ventilation pull handle (Fig. 3).
5 - RECOMMANDATIONS RELATED WITH DUCT CLEANING, STOVE AND SMOKE DUCT
MAINTENANCE
The mechanical cleaning of the smoke duct is compulsory, and must be performed several times per year, at
least during the heating season. A certificate should be handed in by a qualified professional.
At the time of duct cleaning, the following operations must be carried out :
- Dismount the deflector (Fig. 6) and (Fig. 7) :
. Dismount the deflector (lift the deflector
remove it 5).
- Dismount the rear plate of the hearth.
(Assembling the deflector : perform the disassembly operation in the reverse order).
- Check thoroughly the state of the appliance and particularly the elements ensuring sealing : locking joints and
devices, supporting parts (door, frame).
- Check the state of the smoke duct and connecting duct : all the connections must show proper mechanical
resistance and sealing.
- Clean the appliance using a brush and a vacuum cleaner.
In the event of an anomaly : have the appliance repaired or the installation performed by a qualified professional.
After a long off-period :
- Check that nothing obstructs any pipes before using the stove again.
CURRENT MAINTENANCE
- Clean the window using a damp cloth and ash. If required, use an adapted household cleaning product by
observing the instructions of the operation manuals. Wait for the appliance to be completely cooled before
proceeding with this operation.
- Clean regularly the ventilation guides (Fig. 8) :
. Using the tip of a metallic object
which may have formed.
. Using a vacuum cleaner
(Fig. 9).
These particles prevent the forming of the secondary air layer which protects the window from direct contact
with the smoke and completes the combustion of the wood (Fig. 10).
. These operations must be performed whenever the window is dirty and systematically following the total
extinction of the hearth.
1, move it forward 2, tilt the rear
, scratch the inner edges of the cast iron to remove the soot
, remove the particles and dust trapped between the door and window
15
3, lower it
4 and

Publicité

Table des Matières
loading

Table des Matières