Installing The Product As A Spacer Between The Spotlight And The Damp-Proof Foil/Insulation Wool; Installing The Spotclip-Plate With Spotclip-Caps And Spotclip-Tubes; Installing The Spotclip-Plate With Spotclip-Tubes And An Additional Spotclip-Plate - HellermannTyton SpotClip-Plate Manuel D'utilisation

5 .4 Installing the product as a spacer between the
spotlight and the damp-proof foil/insulation
wool
5 .4 .1 Installing the SpotClip-Plate with SpotClip-Caps
and SpotClip-Tubes
1 Place four SpotClip-Caps on four SpotClip-Tubes.
Connecting the SpotClip-Tubes with SpotClip-Caps
2 Insert the four SpotClip-Tubes in the SpotClip-Plate.
Inserting the four SpotClip-Tubes with four SpotClip-Caps on the SpotClip-Plate.
The SpotClip-Caps prevent destruction of the insulating material and the damp-proof
foil or the vapour barrier.
; The product is properly installed.
5 .4 .2 Installing the SpotClip-Plate with SpotClip-
Tubes and an additional SpotClip-Plate
1 Insert four SpotClip-Tubes in the four receptacles on the
SpotClip-Plate.
Inserting four SpotClip-Tubes.
2 Attach the additional SpotClip-Plate to the four SpotClip-
Tubes.
Solution with two SpotClip-Plates one above the other.
Example application using an additional SpotClip-Plate.
; The product is properly installed.
Operating instructions • SpotClip-Plate • 06-2016 • 009-50104
Structure
7