Before Installation; Care & Cleaning; Installation Procedure - Toto TS110MC6 Manuel D'installation Et D'utilisation

Observe all local plumbing codes.
„
Make sure the water supply is shut off.
„
Read these instructions carefully to ensure proper installation.
„
Make sure there are adequate mounting supports.
„
TOTO reserves the right to update the product design without notice.
„
Your new shower arm is designed for years of trouble-free performance. Keep
it looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
CAUTION:
Product being installed onto shower arm is heavy. Make sure there is
„
adequate mounting support prior to installation.
Thoroughly clean and remove debris from the water supply pipe be-
„
fore installation to prevent clogging the spray outlet.
To avoid leakage, do not move the showerhead after installation.
„
Wrap the shower arm threads with pipe tape. Screw the shower arm into
the supply elbow.

BEFORE INSTALLATION

CARE & CLEANING

INSTALLATION PROCEDURE

Shower Arm
Supply Line
3