HTC 400 Manuel D'utilisation page 10

3. Loosen the lock bolts (A) some turns to release the
pressure.
A
C
4. Pull out the lock pins (B) and remove the lock bolts
(C) on each side of the grinding head.
5. Remove the wheel chassis from the grinding head.
6. Push the handle on the central hinge and at the
same time fold the top frame forward. This is the lift
position.
10
7. Remove the lock knobs (A) to loosen the support
foot (B).
A
B
B
8. Hold the handlebar to keep the frame stable and lift
the support foot out and up.
926 - 001 -