Magnavox 42MF439B Manuel De L'utilisateur page 12

P
REPARATION
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
[Audio Output Connection]
Digital (for digital broadcasting only)
If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital
broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.
Analog (for both analog and digital broadcasting)
If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio.
Use an RCA audio cable to connect the unit to external analog audio devices.
e.g.)
Dolby Digital
decoder
stereo system
[PC Connection]
This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection
and it requires stereo mini plug-RCA conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor.
e.g.)
personal computer
HDMI-DVI conversion cable should be with ferrite core.
The following signals can be displayed:
Format
VGA
SVGA
XGA
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
12
EN
DIGITAL AUDIO
COAXIAL IN
or
AUDIO IN
L R
stereo mini plug-RCA
conversion cable
DVI OUT
Resolution Refresh rate
640 x 480 60Hz
800 x 600 60Hz
1,024 x 768 60Hz
digital audio coaxial cable
RCA audio cable
HDMI-DVI
conversion cable b
Format
WXGA
FHD
rear of this unit
rear of this unit
To HDMI1 To H
in input jack only
Resolution Refresh rate
1,280 x 768 60Hz
1,360 x 768 60Hz
1,920 x 1,080 60Hz