Use Of Product; Hob Controls; Oven Controls - Burg BEH3.1 Notice D'utilisation

4. USE OF PRODUCT

4.1 hob ControlS

Ceramic Heater
The ceramic heater is controlled by a 6
position knob.
The ceramic heater is operated by turning
the control knob to the required setting.
Near each control knob is a symbol which
indicates the heater that is controlled by
that knob. The on/off light on the control
panel will show if any of the ceramic
heaters are in use.
Knob Position
0
1
2-3
4-5-6
Important: The knob rotation
direction may differ according to the
product specification.
Dual and Oval Heaters (if available)
Dual and oval heaters have two heating
zones. To activate the outer zone of a dual/
oval heater, turn the knob to
Both outer zones will switch on.
To deactivate the outer zone of a dual/oval
heater, turn the knob to the 'Off' position.
Both outer zones will switch off.
Residual Heat Indicator (if available)
After using the hob there will be heat stored
in the vitroceramic glass called residual
heat. If the residual heat level is greater
than +60°C, the residual heat indicator will
be active for the cooking zone which is
above this temperature.
If the power supply to the hob is
disconnected while the residual heat
indicator is on, the warning light will flash
when the power is reconnected. The
display will flash until the residual heat has
Function
Off position
Keep warm position
Heating position at low heat
Cooking, roasting and boiling
position
position.
decreased or until one of the cooking zones
is activated.

4.2 oven ControlS

Oven function control knob
Turn the knob to the corresponding symbol
of the desired cooking function. For the
details of different functions see ´Oven
Functions`.
Oven thermostat knob
After selecting a cooking function, turn
this knob to set the desired temperature.
The oven thermostat light will illuminate
whenever the thermostat is in operation
to heat up the oven or maintain the
temperature.Oven Functions
* The functions of your oven may be
different due to the model of your product.
static cooking function emits heat, ensuring
even cooking of the food. This is ideal for
making pastries, cakes, baked pasta,
lasagne and pizza. Preheating the oven for
10 minutes is recommended and it is best
to use only one shelf at a time in this
function.
is ideal for heating pizza as the heat rises
from the bottom of the oven and warms the
food. This function is appropriate for heating
food instead of cooking.
the upper cooking element will cook the
upper side of food in the oven. This function
is ideal for frying the upper side of cooked
food and heating the food.
EN - 14
Static Cooking
Function: The oven's
thermostat and
warning lights will
switch on, and the
lower and upper
heating elements will
start operating. The
Lower Heating
Function: The oven's
thermostat and
warning lights will
switch on and the
lower heating element
will start operating. The
lower heating function
Upper Heating
Function: The oven's
thermostat and
warning lights will
switch on and the
upper heating element
will start operating. The
heat emanating from