EINHELL NSG 180 F Mode D'emploi page 14

Anleitung NSG 180 F_SPK1
GB
10. Socket (14)
The welder has a 230 V/50 Hz socket on the back
side protected by a 6 A overload switch (13). The
overload switch (13) actuates if the socket (14) is
overloaded. Following the cool down phase, the
socket (14) can be reactivated using the overload
switch (13). The socket is designed for electric tools
with a maximum power consumption of 600 W.
Important!
Do not use tools during welding work.
11. Maintenance
Remove dust and dirt from the machine at regular
intervals. Cleaning is best carried out with a fine
brush or a cloth.
12. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
14
20.01.2006 13:10 Uhr Seite 14