Troubleshooting - Kenwood KDC-X396 Mode D'emploi

[SETTINGS]
Item
AUX NAME SET/ AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.
AUX NAME (Selectable only if "AUX" is selected as the source.)
CLOCK CLOCK ADJUST/ CLOCK ADJ: (For details, see page 8.)
DISP & KEY (for
COLOR SELECT VARIABLE SCAN */ COLOR 01 – COLOR 24/ USER: Selects your preferred key illumination color.
You can create your own color (when [COLOR 01] — [COLOR 24] or [USER] is selected). The color you
created can be selected when you select [USER].
1. Hold the volume knob to enter the detail color adjustment mode.
2. Press 4 / ¢ to select the color (R/ G/ B) to adjust. Turn the volume knob to adjust the level
(0 — 9).
3. Press the volume knob to confirm and exit.
DISP DIMMER ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL AUTO */ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF: Cancels.
KEY DIMMER DIMMER LV1: Dims the key illumination constantly. ; DIMMER LV2: Dims the key illumination darker
than DIMMER LV1. ; DIMMER OFF *: Cancels.
DISPLAY (for
DISP DIMMER ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL AUTO */ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF: Cancels.

Troubleshooting

Symptom
Sound cannot be heard.
"PROTECT" appears and no operations
can be done.
Sound cannot be heard. / The unit does
not turn on. / Information shown on the
display is incorrect.
The unit does not work at all.
For : The Auto Power Off
function (that will turn the power off in
20 minutes when in standby mode) does
not work.
Radio reception is poor. / Static noise
while listening to the radio.
16
Selectable setting (Preset: *)
)
Adjust the volume to the optimum level. / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with insulating
tape properly, then reset the unit. If "PROTECT" does not disappear, consult your
nearest service center.
The connectors are dirty. Clean the connectors. (page 3)
Reset the unit. (page 4)
Make sure [OFF] is selected for [DEMO MODE]. (page 7)
Connect the antenna firmly. / Pull the antenna out all the way.
)
Remedy/Cause