References; Maintenance; More Information - JVC KD-R985BTS Manuel D'instructions

DISPLAY SETTINGS
2
TEXT SCROLL * SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at
5-second intervals. ; SCROLL OFF: Cancels.
COLOR (for KD-R985BTS/KD-RD98BTS)
PRESET Select illumination colors for button and display separately.
Default color: ALL ZONE: [COLOR 08], DISP ZONE: [COLOR 01], ZONE 1: [COLOR 08],
ZONE 2: [COLOR 46]
1 Select a zone. ( 27)
2 Select a color for the selected zone.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds.
• GROOVE/TECHNO/EMOTION/RELAX/SPECTRUM/SWEEP/POP: The selected
color pattern is shown.*
DAY COLOR Store your own day and night illumination colors for different zones.
Default color:
ZONE 1: [RED 00], [GREEN 05], [BLUE 31]
DISP ZONE: [RED 20], [GREEN 31], [BLUE 31]
ZONE 2: [RED 00], [GREEN 31], [BLUE 00]
1 Select a zone. ( 27)
2 RED/GREEN/BLUE: Select a primary color.
NIGHT COLOR
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing appears on the
display.
• [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car's headlight.
COLOR GUIDE ON: Changes the button illumination and display illumination when settings are
performed on menu and list search. Display zone will automatically change depending on
volume level. ; OFF: Cancels.
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
* 3
If one of these color pattern is selected, the [ZONE 1], [DISP ZONE], [ZONE 2] illumination color will
change to the default color.
28
ENGLISH
3
(Selectable only when [ALL ZONE] is selected in step

REFERENCES

Maintenance

Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the
connector gently with a cotton swab,
being careful not to damage the
connector.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
1
.)
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.

More information

For: – Latest firmware updates and latest compatible item list
– JVC original application
– Any other latest information
Visit <http://www.jvc.net/cs/car/>.
General
• This unit can only play the following CDs:
• DualDisc playback: The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard. Therefore, the use of Non-DVD side
of a DualDisc on this product cannot be recommended.
• For detailed information and notes about the playable audio files, visit
<http://www.jvc.net/cs/car/>.
Connector (on the reverse
side of the faceplate)