Shipping And Handling - Victoria Arduino VA 358 WHITE EAGLE Manuel D'instructions

SHIPPING AND HANDLING

MACHINE ID
When communicating with the manufacturer Victoria
Arduino, always cite the machine ID number.
The machine is transported on pallets contain-
ing several machines inside cartons strapped to
the pallet.
Operators performing any shipping or handling
operations must:
Wear gloves, safety shoes and overalls
with elasticized cuffs.
Always move pallets using adequate equipment
(i.e. fork lift trucks).
CAUTION
DANGER OF IMPACT OR PINCHING
During handling, the operator must
make certain that there are no persons,
things or objects in the vicinity.
Slowly lift the pallet approximately 30
cm off the ground and drive to the load-
ing zone. After having made certain that
there are no obstacles, things or per-
sons in the way, proceed with loading.
Once the destination has been reached,
again using adequate lifting equipment
(i.e. fork lift truck) and after having made
certain that there is nothing and no one
in the unloading area, set the pallet on
the ground and move it to the storage
area; always carry the load at a height of
approximately 30 cm from the ground.
38
CAUTION
DANGER OF IMPACT OR PINCHING
Before performing the following opera-
tions, make certain that the load is in
stable and will not fall when the straps
are cut.
Wearing gloves and safety shoes, the
operator must cut the straps and store
the product. During this operation, see
the product technical features for the
weight of the machine being stored and
proceed as necessary.
DANGER OF POLLUTION
Once the machine has been released
from the pallet or container, do not pol-
lute the environment with these items.