Frequently Asked Questions - Beurer IPL 10000 Mode D'emploi

• In the event of a general fault, all six energy indicator lamps flash green simultaneously. Reset the
device. Should you still have problems with your device, please contact Customer Services.
• Check the indicator lamp. If the indicator lamp on the applicator is flashing red and theindicator lamp
on the device is flashing green, this indicates that the cartridge is not inserted correctly in the applica-
tor. Reinsert the cartridge into the applicator.

11. Frequently asked questions

1. Does the beurer SalonPro System really work?
Yes. In clinical tests performed by doctors, it was proven that the technology in the beurer SalonPro
System can be used to safely achieve lasting hair removal results.
2. On which parts of my body can I use the beurer SalonPro System?
The beurer SalonPro System was designed for hair removal all over the body. The most common areas
that are treated with the beurer SalonPro System are the legs, armpits, arms, bikini zone and the face
below the cheekbones.
3. How long does a treatment session using the beurer SalonPro System last?
The time can vary depending on the area of the body being treated. A full body treatment (legs, arms,
armpits, bikini zone and face below the cheekbones) takes approximately 26 minutes. As the beurer
SalonPro System is operated using electricity, it can be used for as long as necessary to perform a full
hair removal session on the desired area(s) of the body.
4. Is the beurer SalonPro System safe?
The beurer SalonPro System was developed with a strong focus on your safety and employs clinically tes-
ted technology. However, this device – like any other product or electronic device intended for application
on the skin – must be used in accordance with the instructions for use and the safety notes for users.
5. Is using the beurer SalonPro System painful?
When used correctly, most users of the beurer SalonPro System report a slight warm feeling when the
light pulse is issued. Users with thicker and darker hair could feel slightly more discomfort, but this
should subside once the hair removal session is finished. The beurer SalonPro System features six
energy level settings that you can select according to your sensitivity.
6. How often should I use the beurer SalonPro System?
In the case of body hair treatment with the beurer SalonPro System, the first four sessions should be
performed two weeks apart. The fifth to seventh sessions inclusive can be performed four weeks apart.
Any further sessions should be performed if the hair has grown back until the desired results have been
achieved.
In the case of treatment of hair on the face below the cheekbones, the first six sessions should be per-
formed two weeks apart. The seventh to twelfth sessions can be performed four weeks apart. Any
further sessions should be performed if the hair has grown back until the desired results have been
achieved.
7. Is the beurer SalonPro System effective on white, grey or blond hair?
The beurer SalonPro System works best on dark hair types and on hair with a high melanin content.
Melanin is the pigment that gives hair and skin its colour and absorbs light energy. Black and dark
brown hair shows the best response. Brown and light brown hair also responds to treatment, but it usu-
ally requires more hair removal sessions. A limited effect can be seen on red hair. White, grey or blond
hair does not usually respond to the beurer SalonPro System, although several users have noticed
results after multiple hair removal sessions.
8. Can I use the beurer SalonPro System on brown or black skin?
Do not use the beurer SalonPro System on naturally dark skin! It does not work!
39