Control Panel Description; Oven Operation; Starting The Oven - FP 310 Manuel D'utilisation

INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional removal.
Fig. 1
1. Insert the wire shelf horizontally, with the raised part "A" upwards (Fig. 1).
2. Angle the wire shelf when it reaches the locking position "B" (Fig. 2).
Fig. 2
3. Return the wire shelf to the horizontal position and push it in fully to "C" (Fig. 3).
4. To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface
enables the accessories to lock in place.

CONTROL PANEL DESCRIPTION

1

OVEN OPERATION

Starting the oven

When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates
"12:00".
Selecting and changing the clock time:
1. Press "set". The time of day flashes on the display.
2. Press button "-" or "+" to set the hour.
3. Press "set" and "-" or "+" to set the minutes.
4. Press "ok" to confirm.
To change the time:
Press and hold "ok" for 3 seconds. until the time flashes on the display. Repeat the steps described above.
Fig. 3
2 3 4
Timer
Special functions
Key lock
Cooking function selection knob
Cooking time
End of cooking time
1. Function selector knob
2. Setting button ("set")
3. Confirmation button ("ok")
4. Buttons for changing time ("-" "+")
5. Thermostat knob
5
GB7