Additional Information Precautions - Sony HST-SE581 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2
Press S.WOOFER PHASE on the
remote to select the polarity that
provides the best bass reproduction.
3
Press WOOFER, then – or + to
adjust the superwoofer level (or
LEVEL S.WOOFER +/– on the
remote).
Notes
• You can only adjust the superwoofer level when
the superwoofer is on (when the SUPER WOOFER
indicator is lit).
• You cannot use the superwoofer when you select
PHONO ("SELECT OTHER FUNCTION"
appears).
Additional Information
Precautions
On operating voltage
Before operating the system, check that the
operating voltage of your system is identical with
the voltage of your local power supply.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
• Unplug the system from the wall outlet (mains) if
it is not to be used for an extended period of time.
To disconnect the cord (mains lead), pull it out by
the plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have
the component checked by qualified personnel
before operating it any further.
• The AC power cord must be changed only at the
qualified service shop.
On placement
• Place the stereo system in a location with adequate
ventilation to prevent heat build-up in the stereo
system.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Subject to direct sunlight.
continued
25
EN

Publicité

Table des Matières
loading

Table des Matières