Bosch UniversalCirc 12 Notice Originale page 17

Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Battery release button
(2) Battery
(3) Lock-off button for on/off switch
(4) On/off switch
(5) Hex key
(6) Spindle lock button
(7) Base plate
(8) Fastening screw for parallel guide
(9) Scale for mitre/bevel angles
(10) Wing bolt for mitre/bevel angle preselection
(11) Cut mark 45°
(12) Cut mark 0°
(13) Protective guard
(14) Auxiliary handle (insulated gripping surface)
(15) Handle (insulated gripping surface)
(16) Battery charge indicator
(17) Temperature monitoring/overload protection indic-
ator
(18) Wing bolt for preselecting the cutting depth
(19) Cutting depth scale
(20) Retracting blade guard
(21) Saw spindle
(22) Adjusting lever for retracting blade guard
(23) Mounting flange
(24) Circular saw blade
(25) Clamping flange
(26) Clamping bolt
(27) "PowerLight"
(28) Reference mark for mitre/bevel angle setting
(29) Fastening screw for dust extraction adapter
(30) Dust extraction adapter
A)
(31) Dust extraction hose
(32) Reference mark for cutting depth setting
(33) Parallel guide
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Hand-held circular saw
Article number
Rated voltage
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
Bosch Power Tools
Hand-held circular saw
– at a 45° mitre/bevel angle
Spindle lock
Base plate dimensions
Max. saw blade diameter
Max. base blade thickness
Max. tooth thickness/offset
Min. tooth thickness/offset
Locating bore
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation
Recommended batteries
Recommended chargers
A) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted sound pressure level of the power
tool is 74 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
determined according to EN 62841-2-5:
Sawing wood: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
UniversalCirc 12
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
3 603 CC7 0..
over the total working period.
V 12
Implement additional safety measures to protect the oper-
rpm 1400
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
mm 26
mm
mm
mm
mm
mm
mm
mm
A)
and
during storage
(triax vector sum) and uncertainty K
h
2
= 1.0 m/s , K = 1.5 m/s
h
1 609 92A 4L6 | (28.08.2018)
English | 17
UniversalCirc 12
17
●
147 x 88
85
0.7
1.1
1.0
15
kg 1.4
°C 0 to +45
°C –20 to +50
PBA 10.8 V ...
PBA 12 V ...
AL 11..CV
GAL 12..
2