en Installation and connection
Tips for saving energy
If you follow the instructions below, your appliance will use less power.
The arrangement of the features does not affect the energy consumption of
Note:
the appliance.
Installing the appliance
Keep the appliance out of direct sunlight.
Install the appliance as far away as possible from
heating elements, cooker and other heat sources:
3 cm to electric or gas cookers.
30 cm to an oil or solid-fuel cooker.
Note:
If this is not possible, attach an insulating
plate between the appliance and heat source.
Select an installation location at a room temperature
of approx. 20 °C.
Use a cavity depth of 56 cm.
Caution!
Risk of burns!
Individual parts of the appliance become hot during
operation. Touching these parts may result in burns.
Do not cover or block the ventilation openings.
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly.
Transport purchased food in a cold bag and place
quickly in the appliance.
Allow warm food and drinks to cool down before
placing in the appliance.
Thaw frozen food in the refrigerator compartment in
order to utilise the low temperature of the frozen
food.
Always leave a space between the food and the back
wall.
Pack food airtight.
Vacuum the back of the appliance once a year.
Do not cover or block the ventilation openings.
24
The appliance must cool less frequently at low
ambient temperatures and therefore consumes less
power.
The air on the rear panel of the appliance does not
warm up so intensely. The appliance consumes less
power if the warm air can escape.
The air in the appliance does not warm up so
intensely. The appliance must cool less frequently
and therefore consumes less power.
The air can circulate and the humidity will remain
constant. The appliance must cool less frequently
and therefore consumes less power.
The air on the back wall of the appliance does not
warm up so intensely. The appliance consumes less
power if the warm air can escape.