3. USE OF YOUR APPLIANCE
A. Before using your appliance for the first time
•
Unpack your appliance and check that all elements and accessories are present and
undamaged.
•
Check that all wrap elements (plastic, cardboard box, polystyrene) have been
removed.
•
Clean all the parts according to the instructions given in the "Maintenance of your
appliance" section.
•
Dry all parts thoroughly and assemble them, the oven is now ready to use.
Heat the empty oven:
•
Insert the tray and wire track.
•
Set the cooking function on
then heat the empty oven for about 10 minutes.
•
Then, let it cool down, remove the plug from the power socket and clean all the
detached parts again.
Note:
There may be some smoke and a burning smell during the first use, however it is normal.
B. Temperature control
Adjust the temperature depending on the dish you will cook.
Press on «+/-» to adjust the temperature 10 by 10°C according to the dish
you want to cook (temperature between 70°C and 250°C). After having
adjusted the thermostat, the cooking starts after 5 seconds of inactivity. Then,
the screen will show the temperature of cooking.
C. Cooking time setting
Press on «+/-» to adjust the time from 0 to 120 min. Time can be
increased/decreased 1 by 1 until 20 min; 5 by 5 increase/decrease above 20
min to 90 min. After having adjusted the cooking time, the oven starts the
cooking after 5 seconds of inactivity. Then, the screen will show the
remaining time of cooking.
The oven can be turned off manually during cooking by turning the timer
anti-clockwise to the "0" position.
Note: If the inside of the oven is dirty, cooking may take slightly longer than usual.
and set the temperature control knob to « 250°C »
23